-
JonathasThe coupler they suggested are quite suitable to replace old ones. Price is reasonable, and looking forward to receive the thhem.
-
JoseThe DF8B spare parts I got are all correct. Lead time is fast, and anytime I have problems, Sunny are always here to help me. Thanks her a lot,and looking forward to our future cooperation again.
21mm-89mm Railway Vacuum Brake Hose 11 Bar Rubber Steel Fabric

Contact me for free samples and coupons.
whatsapp:0086 18588475571
wechat: 0086 18588475571
Skype: sales10@aixton.com
If you have any concern, we provide 24-hour online help.
xProduct Name | Railway Vacuum Brake Hose | Material | Rubber,steel,fabric |
---|---|---|---|
Dimensions | Customizing | Colour | Black |
Production Standard | BS 3682-2 | Operated Pressures | 11bar |
Work Temperature | -25°C To +65°C | Tensile Strength | ≥14MN/m² |
Breaking Elongation | ≥500% | Outer Diameter | 21mm-89mm |
Internal Diameter | 12.5mm-76mm | Application | Railway Vehicle Brake Vacuum Hose |
Highlight | 89mm Railway vacuum brake hose,vacuum brake hose 11 Bar,11 Bar railcar air brake hoses |
Railway vacuum brake hose
Railway vacuum brake hose used in the braking systems of railway locomotives and rolling stock. This vacuum hose use in compressed-air braking systems operated at pressures up to a maximum of 11.5 bar and within the temperature range -25°C to +65°C . Vacuum breaking systems operated at a vacuum up to 990 mbar and within the temperature range -25°C to +65°C .
Railway vacuum brake hose is mainly composed of :
a) An internal wire spiral.
b) An inner ply of fabric. This shall extend not more than 10.0 mm beyond the end of the internal wire.
c) A rubber lining throughout the length of the hose.
d) A ply of impregnated fabric throughout the length of the hose.
e) Fabric reinforcement extending for approximately 125 mm from each end.
f) A fabric cover over the whole length of the hose.
The lining shall be uniform, reasonably concentric,free from air holes, porosity and other defects. The thickness shall be not less than 3.2 mm.
The inside surface of the rubber at the ends of the hose shall readily conform to the nipples of the couplings or pipe ends.
The hose shall be consolidated and shall be uniformly vulcanized.
Product Specification
Designation of hose (mm) | Min. Bore of internal spiral(mm) | Bore of soft end (mm) |
Distance of wire from end Min. (mm) |
Diameter wire (mm) |
Number of coil per meter(mm) |
12.5 | 12.5 | 21 | 51 | 2 | 110-115 |
19 | 19 | 27 | 51 | 2 | 110-115 |
25 | 25 | 33.5 | 51 | 2 | 95-102 |
32 | 32 | 41 | 51 | 2.65 | 75-82 |
38 | 38 | 48 | 51 | 2.65 | 75-82 |
51 | 51 | 59 | 51 | 3.35 | 75-82 |
63.5 | 63.5 | 76 | 57 | 3.35 | 75-82 |
76 | 76 | 89 | 63.5 | 3.35 | 75-82 |
Structure:
a) Internal wire spiral
b) Inner ply of fabric
c) Rubber lining
d) Ply of impregnated
e) Fabric reinforcement
f) Fabric cover
Tensile strength : ≥14 MN/m² , break elongation : ≥500%
Adhesion : 67 N, shall not separate at a rate of more than 25 mm/mim
Ageing resistance : aged for 168H at a temperature of 70±1°C,shall show results which do not vary by more than 20% from the unaged values.
Vacuum retention: 170 mbar, and the hose shall not shorten by more than 5% in that period.
Non-kinking: When do strength and flexibility testing, the hose should be parallel, without permanently distorting or displacing the wire.
Drawing
Advantage
- Shorten braking distance
- Reduce wheel wear
- Durable and long service life
- Good flexibility and burst resistance
- Wear resistance, not easy to crack
- Easy installation and impact resistance
- High tensile strength, stable braking effect
- Ozone resistance and low temperature resistance
Application
Related Products
We also have
Railway air brake hose
Railway air brake hose assembly
Railway hose couping head, hose connector